HEPA filters are available in all sizes in the deep pleat version.
Non-Standard sizes can also be manufactured as per specific customer requirements.
The filter can be assembled with / without flanges
Available in casing thickness from 1 to 1.5 mm in variants of Mild steel/Galvanized steel/Aluminium/Stainless steel Powder coating is the standard surface finishing offered
Filtration media is all glass, micro fibre, fire retardant HEPA filtration media manufactured by M/s.Lydall Inc, USA. Aluminium separators made from 0.04 mm thick aluminium foil in the case of deep pleat version.
High impact poly styrene separators in the case of mini pleat version Synthetic soft rubber gasket with dovetail joints. Epoxy & Silicon Sealants
Initial pressure drop of 18 mm WC for deep pleat filters and 14 mm WC for mini pleat filters
Suitability to class 100 clean rooms and work stations as per FED:STD:209E
Efficiency 99.98% down to 0.3 microns. Suitable for H13 class as per EN779
All filters are particle counted and DOP leak tested
Filter construction as per recommendations of IES-RP-001
Each filter is accompanied by a test certificate