Powder Containment booths are used to control the hazardous emissions of powder dust during powder dispensing/sampling processes with out any risk to the operator and product as well protecting the environment. The down draught of HEPA filtered air prevents airborne dusts caused by handling operation away from the operator breathing zone. The air forced downwards is extracted at low level into the booth’s filteration system, where dust particles are contained at three level of filteration prior to being circulated back in to the booths air stream.
Dispensing / Sampling Booths
Type | Front Open |
Direction of flow | Vertical |
Material of Construction | S.S 304 / S.S 316 or CRCA Powder Coated |
Cleanliness | Class 100 as per US FED STD 209E |
Particle Retention | 0.3 micron & above |
Noise Level | 65 dB on On Scale ’A’ ± 5 |
Velocity | 90 FPM ± 20 % |
Illumination | Fluorescent tubes diffusers |
Pressure Differential | 0-25 mm inclined Manometers / Magnehelic Gauge |
Power Supply | 230 V single Phase , 50 Hz |
Pre-Filters | 10 - 15 micron rating,3- Layers of HDPE mesh, 6mm Pressure Drop |
Intermediate Filters | 3 micron & above,two layers of HDPE woven mesh and one layer of Non-woven polyester Bondex Media, 9 mm Pressure Drop, Efficiency 97% |
Supply HEPA Filters | 99.97% efficiency @ 0.3 micron rating |
Exhaust HEPA Filters | 99.97% efficiency @ 0.3 micron rating |
Blower Assembly | Statically & Dynamically balanced DIDW type blower system |
Special Features
- Designed in accordance with WHO-GMP
- 3-Stage Filteration like Pre filter, Fine Filter, HEPA filter
- Heavy duty Low noise motor blower assembly
- Suitable to accommodate to floor & table balances